Konica Minolta bizhub C450, Быстрое руководство

Страница: 16 / 94

Overview
1
C450 1-3
Printing Flow
When using this printing system as a printer, the flow of the main process is
described below.
Print commands transmitted from the application are received by the printer
driver.
Data is transmitted to this machine over a parallel interface (IEEE 1284) when
this machine is used as a local printer, over a USB interface when this ma-
chine is used as a USB printer, or over an Ethernet interface (TCP/IP, IPX/
SPX, AppleTalk) when this machine is used as a network printer. The data is
then delivered from this machine to the printer controller, which performs im-
age rasterization (development of output characters and images to bitmap
data). Finally, this data is printed from this machine.
2
Note
The parallel and USB interfaces cannot be used simultaneously.
Original documents can be scanned in the copy function or network scan
function while this machine is operating as a printer.
To use this machine as a copier, press the [Copy] key on the control panel.
Computer
Used as a local
printer
Used as a USB
printer
Application Application Application
Used as a
network printer
Printer driver Printer driver Printer driver
Parallel interface
(IEEE 1284)
USB
Ethernet (TCP/IP, IPX/
SPX, or AppleTalk)
Machine
Print
Printer controller
PS/PCL processing (rasterizing)