Konica Minolta BIZHUB C353P, Руководство пользователя

Страница: 49 / 516

C353P 1-18
Before using the machine
1
1.3 Paper
Use paper that meets the following specifications.
1.3.1 Possible paper sizes
Non-standard-sized paper:
* Banner paper
Paper width: 8-1/4 to 11-3/4 (210 mm to 297 mm)
Paper length: 18 to 47-1/4 (457.3 mm to 1200 mm)
Standard-sized paper:
*1
For thick paper 4, only A3 w , A4 v , 11 × 17 w and 8-1/2 × 11 v are available for printing.
*2
12 × 18 is equivalent to 304.8 mm × 457.2 mm, which is one size larger than A3.
*3
There are five Foolscap sizes: 220 × 330 mm w , 8-1/2 × 13 w , 8-1/4 × 13 w , 8-1/8 × 13-1/4 w , and 8 ×
13 w . Any one of these sizes can be selected. For details, contact your service representative.
*4
5-1/2 × 8-1/2 w can be used with the North American (inch) model only.
*5
A5 w can be used with the European (metric) model only.
Paper source Paper width Paper length
Bypass tray* 3-1/2 to 12-1/4 (90.0 mm to 311.1 mm) 5-1/2 to 47-1/4 (139.7 mm to 1200.0 mm)
Tray 1 – –
Tray 2
Single/Double paper feed
cabinets
LCT
Double-sided prints 5-1/2 to 12-1/4 (139.7 mm to 311.1 mm) 5-3/4 to 18 (148 mm to 457.2 mm)
Paper source Paper size
Bypass tray
*1
12 × 18 w
*2
to 5-1/2 × 8-1/2 w / v (A3 w to B6 w , A6 w , 8 × 13 w
*3
, 16K w / v , 8K w )
Tray 1 11 × 17 w to 8-1/2 × 11 w / v , 5-1/2 × 8-1/2 w
*4
(A3 w to B5 w / v , A5 w
*5
, 8 × 13 w
*3
,
16K v , 8K w )
Tray 2 12 × 18 w
*2
to 8-1/2 × 11 w / v , 5-1/2 × 8-1/2 w
*4
(A3 w to B5 w / v , A5 w
*5
, 8 × 13 w
*3
,
16K v , 8K w )
Single/Double paper feed
cabinets 11 × 17 w to 8-1/2 × 11 w / v , 5-1/2 × 8-1/2 w
*4
(A3 w to B5 w / v , A5 w
*5
, 8 × 13 w
*3
,
16K v , 8K w )
LCT 8-1/2 × 11 v (A4 v )
Double-sided prints 12 × 18 w
*2
to 5-1/2 × 8-1/2, 12-1/4 × 18 w , 4 × 6 w (A3 w to A5 w / v , 8 × 13 w
*3
,
16K w / v , 8K w )
Loaded equipment Paper sizes that can be loaded
Finisher FS-519 Output tray 1, 2 and optional Output Tray
11 × 17
w , 8-1/2 × 11 w / v , 5-1/2 × 8-1/2 w / v , 12-1/4 × 18 w
(A3 w to B6 w , A6 w , 12-1/4 × 18 w )
"Group"/"Sort" settings: 11 × 17 w to 8-1/2 × 11 w / v (A3 w to A5 w )
Staple settings: 11 × 17 w to 8-1/2 × 11 w / v (A3 w to A5 w )
Punch settings*:
2-hole: 11 × 17
w to 8-1/2 × 11 w / v
3-hole: 11 × 17 w , 8-1/2 × 11 v
4-hole: A3 w , A4 v , B5 v
Optional output tray
OT-602
Saddle stitcher SD-505 Fold & staple: 11 × 17 w , 8-1/2 × 11 w (A3 w , B4 w , A4 w , B5 w )
Mailbin kit MT-502 8-1/2 × 11 v , 5-1/2 × 8-1/2 w (A4 v , B5 v , A5 w )