Konica Minolta bizhub C200, Руководство пользователя

Страница: 145 / 268

C200 4-37
Troubleshooting
4
4.9 Main messages and their remedies
If any message other than those listed above appears, perform the operation described in the message.
Message Cause Remedy
Misfeed detected.
Remove paper from part indicated
by the circle. Since a paper misfeed occurred, the
machine is unable to make copies. Remove any misfed paper. (See
p. 4-3
.)
Properly close the section(s) indicat-
ed by the arrow(s). Since a machine door or cover is
open, the machine is unable to make
copies. Make sure that all doors and covers
are closed.
The original size cannot be detected.
Select the paper size. (1) The document is not positioned
correctly. (1) Position the document correctly.
(2) A document with a non-standard
size or with a size too small to be de-
tected is loaded. (2) Select the correct paper size.
Replenish paper. The indicated tray has run out of pa-
per. Load more paper. (See
p. 1-22
,
p. 1-26 or p. 1-28 , p. 1-30 .)
Paper of matching size is not availa-
ble.
Select the paper size. Paper of a suitable size is not loaded
in a paper tray. Either select paper of a different size
or load paper of a suitable size.
Paper setting is not correct.
Please set paper correctly. Paper of a suitable size is not loaded
in the paper tray. Select the appropriate size for the
paper loaded in the paper tray.
Input Account Name and Password
to login. Account track settings have been
specified. Copies cannot be made
unless an account name and its cor-
rect password are entered. Type in the account name and its
correct password. (See
p. 1-19
.)
Malfunction detected.
Inform the service representative of
the error code. The machine malfunctioned and is
unable to make copies. Inform your service representative of
the error code displayed in the
screen.
Scan job deleted. Image does not fit
selected paper size. When the ADF was used to make an
enlarged copy of a rotated image,
the width of the image exceeded
297.0 mm and a copy could not be
printed.
Example: A4
v > A3 w , B5 v > B4 w
Change the orientation of the docu-
ment loaded into the ADF so that the
width of the image does not exceed
297.0 mm.