Konica Minolta bizhub 185, Руководство пользователя

Страница: 102 / 146

[UTILITY] 9
9-10 bizhub 185
9.3
9.3.5 [JOB SETTING]
Configure paper settings for each tray and output settings.
%
Press the
Menu/Select
key ö [UTILITY] ö [JOB SETTING].
Settings
[TRAY PRIORITY] Specify the paper tray displayed for default settings.
[TRAY1] Displays
Tray 1
as the default paper
tray.
[MULTI BYPASS] Displays the
Bypass Tray
as the de-
fault paper tray.
[TRAY1 PAPER] [SIZE] Select the size of the paper loaded in
the paper tray.
[TYPE] Select the type of the paper loaded in
the paper tray.
[BYPASS PAPER] [SIZE] Select the size of the paper loaded in
the paper tray.
[TYPE] Select the type of the paper loaded in
the paper tray.
[PRINT PRIORITY] Specify whether to give priority to print jobs when the machine re-
ceives a print job while printing copies.
[COPY] The copy operation is given priority for
30 seconds after printing copies.
If no operation is performed for 30 sec-
onds after printing copies or last copy
operation is finished, execute a print
job.
[PRINT] As print jobs are given priority, execute
a print job immediately after printing
copies.
[CRISSCROSS MODE] Specify whether or not copies are fed out in an alternating crisscross
pattern when the crisscross output conditions are met.
Factory default
[TRAY PRIORITY] [TRAY1]
[TRAY1 PAPER] <Metric area>
[SIZE]: [A4
v ]
<Inch area>
[SIZE]: [Letter
v ]
[TYPE]: [PLAIN]
[BYPASS PAPER] <Metric area>
[SIZE]: [A4
v ]
<Inch area>
[SIZE]: [Letter
v ]
[TYPE]: [PLAIN]
[PRINT PRIORITY] [COPY]
[CRISSCROSS MODE] [OFF]
JOB SETTING
TRAY PRIORITY
TRAY1 PAPER
BYPASS PAPER
JOB SETTING
PRINT PRIORITY
CRISSCROSS MODE
RETURN