Konica Minolta AccurioLabel 230, Быстрое руководство, Страница: 175 / 194

AccurioLabel 230 6-25
6.5 A media feeding error occurs 6
6.5.5 The media wrinkles
If the media wrinkles, follow the procedures below to solve the problem:
STEP 1: Adjust the Fusing Speed

Adjust MACHINE - [Paper Setting] - [Change Setting] - [Process Adjustment] - [Fusing Speed Ad-
justment].
%
[Process Adjustment] is not displayed by default. For details, contact your service representative.
6.5.6 The media in the feeding section goes out alignment
If Roll Winder RW-110 goes out alignment, follow the procedures below to solve the problem:
STEP 1: Check the Position of the Media

Check if the media is set in the right position.
%
For details, refer to page 5-10.
STEP 2: Check the Settings of the Compressor

Check the settings of the compressor.
%
For details, contact your service representative.
6.5.7 The status of Roll Winder RW-110/Roll Winder RW-210 is displayed in red
If the status display of Roll Winder RW-110 and Roll Winder RW-210 on the MACHINE screen on the touch
panel of the main body is red, follow the following procedure to solve the problem.
STEP 1: Confirm the Preparation before Printing

Confirm whether the preparation before printing is performed appropriately.
%
For details, refer to page 3-4.
6.5.8 "Torque too High, reduce tension or increase taper" is displayed and media
is not transferred
If "Torque too High, reduce tension or increase taper" is displayed on the touch panel on the upper side of
Roll Winder RW-210 , follow the following procedure to solve the problem.
STEP 1: Confirm the Preparation before Printing

Confirm whether the preparation before printing is performed appropriately.
%
For details, refer to page 3-4.
6.5.9 The message "Safety door open" is displayed
If "Safety door open" is displayed on the touch panel of Roll Winder RW-210 , follow the following procedure
to solve the problem.
STEP 1: Confirm the Preparation before Printing

Close all of the doors and covers of Roll Winder RW-110 or Roll Winder RW-210.
%
For details, refer to page 3-4.