Konica Minolta AccurioLabel 230, Быстрое руководство, Страница: 173 / 194

AccurioLabel 230 6-23
6.5 A media feeding error occurs 6
14
Press [Start Convey] on the MACHINE screen on the touch panel of the main body.
%
Confirm that the status of Roll Winder RW-110 and Roll Winder RW-210 is displayed in blue.
15
Redo it from step 1 if the value of the web guide set to ±0 is not stable or the media is wound being
misaligned.
16
Install the cover of the web guide of Roll Winder RW-110 and Roll Winder RW-210 .
6.5.2 The jam code J-1714 is displayed
The jam code J-1714 is displayed when the machine detects that the delivering roller stops while conveying
paper at a low speed before printing.
Follow the procedures below to solve the problem:
STEP 1: Check the Position of the Media

Check if the tension setting of the media has been made properly.
%
For details, refer to page 5-10.
STEP 2: Clean the Adhesive Sticking on the Parts

Clean the leading section or the delivering section if it is dirty with adhesive.
%
For details, refer to page 5-5, page 5-7.
STEP 3: Clear Paper Jams

Open and close the front door of the main body to clear the paper jam.