Konica Minolta 8020, Инструкция по эксплуатации

Страница: 21 / 212

2 2.4 Precautions for Routine Use
2-6 Konica 8020/8031
S
a
fe
ty
Infor
m
ati
o
n
Chap
ter
2
2.4 Precautions for Routine Use
2.5 For Users in countries not subject to Class B
regulations
WARNING
This is a Class A product. In a domestic environment this product may cause radio
interference in which case the user may be required to take adequate measures.
2.6 LED Radiation Safety
This product is a copier which operates by means of a LED (light emitting diodes)
exposure system. There is no possibility of danger from the LED optical radiation,
because the LED optical radiation level does not exceed the accessible radiation
limit of class 1 under all conditions of operation, maintenance, service and failure.
• Do not store toner units, PC drum units, and other supplies and consumables in a
place subject to direct sunlight and high temperature and humidity, as poor image
quality and malfunction could result.
• Do not attempt to replace the toner unit and PC drum unit in a place exposed to direct
sunlight. If the PC drum is exposed to intense light, poor image quality could result.
• Do not unpack a toner unit or PC drum unit until the very time of use. Do not leave an
unpacked unit standing. Install it immediately or poor image quality could result.
• Do not keep toner units and PC drum units in an upright position or upside down, as
poor image quality could result.
• Do not throw or drop a toner unit or PC drum unit as poor image quality could result.
• Do not use this product in an area where ammonia or other gases or chemicals are
present. Failure to do so may shorten the service life of the product, cause damage
or decrease performance.
• Do not use this product in an environment with a temperature outside the range
specified in the Instruction manual, as a breakdown or malfunction could result.
• Do not attempt to feed stapled paper, carbon paper or aluminum foil through this
product, as a malfunction or fire could result.
Do not touch or scratch the surface of the toner unit, developing roller and the PC drum,
as poor image quality could result.
Use the supplies and consumables recommended by the dealer. Use of any supply or
consumable not recommended could result in poor image quality and breakdown.