Konica Minolta 0902, Руководство по обслуживанию

Страница: 22 / 302

Chapter 2 Before the Repair
2-2
2.1 Name of Parts
Following are names of parts that is necessary to know when performing repair of the REGIUS MODEL
110.
Exterior
*: Switch the position of dummy operating panel and operation panel when the equipment is placed
vertically.
No. Name Function
1 Air intake Intake the air to cool the interior.
2 Cassette insertion slot Slot to insert/eject the cassette to the REGIUS MODEL 110.
3 Status lamp Displays the status of the REGIUS MODEL 110 with LEDs.
•
Off: Stopped, starting up, stopping
•
Blue light on: Idling
•
Orange light flashing: Transporting cassette
•
Orange light flashing fast: Ejecting cassette
•
Orange light on: Cassette ejected
•
Blue/orange lights
flashing alternately: Malfunction
4* Dummy operation
panel
A cover on the side where the operation panel is not connected, out of 2
operation panel attachment locations.
5* Operation panel Message display window showing the status and errors of the REGIUS
MODEL 110 and switches to operate the equipment is located.
See " Operation Panel (Page 2-3)" for description.
6 Second front door A door user open to clear the cassette jam or replacing the erase lamp.
7 First front panel An exterior panel.
8 Power supply circuit
breaker
Turn ON/OFF power supply of the REGIUS MODEL 110.
9 Second front back panel An exterior panel.
10 Power supply port Connect the power supply cable.
11 Ethernet connection
port
Connect the ethernet cable.
12 First front back panel An exterior panel.
5
*
7 12
8
1 2
3
6
4
*
10
9
11
First front side
Second front side
First front back side
Second front back side