Konica Minolta 0404, Руководство по установке

Страница: 34 / 48

2.5 Moving to and Fixing at Installation Location
2-22
2.5 Moving to and Fixing at Installation Location
Move the machine and fix it at the installation location.
1
Move the optical part to the second front side and
fix it with the quick lock.
2
Move the unit to the planned installation location.
3
Install the machine temporarily at the installation
location.
4
Disengage the quick lock.
Pulling the blue knob up disengages the lock.
5
Adjust the four adjuster feet to fix the machine.
While checking the level inside the second front cover,
ensure that the bubble is in the circle.
6
Rock the main unit gently to make sure that it is
fixed securely.
This is the final step in the process of moving to and fixing at the installation location.
Caution
Because the protective parts have been removed, subjecting the machine to a strong shock
may damage the inside of the main unit. Move the machine carefully.
Note
•
When the optical part is moved all the
way to the front, the locking rod moves
down automatically to lock into position.
•
The second front cover does not close
completely when the quick lock is
engaged. (This is to remind you to
disengage the lock)
Important
When pulling the knob up, push the optical
part slightly towards the back. When the
optical part is placed in the front, the locking
rod may lower again and return to the lock
position. After disengaging the lock, shift the
optical part and make sure that the locking
rod is not in the lowered position.
Level
0404YF220A.book 22 ページ ２００９年８月２０日 木曜日 午後１時２６分