Kongsberg Simrad TV80, Справочное руководство

Страница: 276 / 356

274
406388/F
Non editable information about the sensor
Every sensor has some unique settings.
Description
The information “read” from the
sensor is shown in grey colour and
cannot be edited.
Details
FPGA Version
The field-programmable gate array (FPGA) version is unique for every sensor.
This number identifies the sensor and its electronics.
PCB Serial Number
The printed circuit board serial number is unique for every sensor. This number
identifies the sensor and its electronics. The serial number facilitates identification
for later reparations.
Software Version
This number shows the current software version of the selected sensor.
Battery charge state
When working with wireless sensors, it is vital to know the current level of
battery. If battery status is important for you, you can use one of the measurements
available to report the current charging status.
Battery temperature
In order to check the performance of the sensor or any potential problem, the
temperature of the battery will help diagnostics.
Lid Type
Some sensors can give different measurements depending on the type of lid they
have. You can quickly identify the type of lid your sensor has, if any.
Pitch and roll readouts
The standard version of the sensor is provided with built-in roll and pitch sensors
so that you can verify that the sensor is aligned correctly. To verify that the roll and
pitch sensors inside your sensor are operational, simply lift and move the sensor.
The information in the two fields will change accordingly.
Measurements unlocked
The number indicates the amount of measurements unlocked; that is, the number of
measurements your sensor can take. An additional license is required if you wish
to make more than two measurements.
Relevant topics
• Introduction to PX Sensors Configuration dialog boxes, page 259
Simrad TV80 Reference Manual