Kongsberg Simrad MF90, Руководство по установке

Страница: 49 / 426

476671/B
47
Cables
Each electric cable must be handled carefully. This is important to avoid damage to
the cable. This is also important to avoid electric shock in the event that the cable is
unintentionally connected to a power source.
Cabinets
Do not open racks or cabinet doors while sailing in rough seas. Doors and/or cabinet
parts may suddenly swing open and cause damage or injury.
Related topics
Simrad MF90, page 13
Preparations, page 42
Installing the MF90 system hardware units, page 126
About installation drawings
The installation shipyard must provide all necessary design and installation drawings, as
well as the relevant work standards and mounting procedures.
Note
If required, all documents provided by the shipyard for the physical installation of the
MF90 system must be approved by the vessel’s national registry and corresponding
maritime authority and/or classification society. Such approval must be obtained before the
installation can begin. The shipowner and shipyard doing the installation are responsible
for obtaining and paying for such approval.
Kongsberg Maritime offers free advice for installation planning. Proposed arrangements
may be sent for commentary or suggestions. The following drawings should be submitted
should assistance be requested:
• General arrangement
• Body plan and drawings of the relevant compartment
• Lines plan
Relevant outline dimensions and production drawings can be download from our website.
Most documents are available in PDF and/or AutoCad (DWG) formats.
• https://www.kongsberg.com/mf90
Related topics
Preparations, page 42
Preparations