Kongsberg Simrad MF90, Руководство по установке

Страница: 313 / 426

476671/B
311
Assigning functions to F1, F2 and F3 on the Operating Panel
(Mk2)
The Mk2 Operating Panel is fitted with three function buttons. The buttons are identified as
F1
,
F2
and
F3
. Each button can be assigned a dedicated function.
Context
The
Operating Panel
page is used to select which physical
hardware panel you use, and to assign functionality to
the programmable buttons. This page is located in the
Installation
dialog box. The
Installation
dialog box is
located on the
Setup
menu.
The three function buttons are grouped with the
Screen Capture
button.
The following functions can be assigned:
Auto Tilt
This is an "on/off" function. When Auto Tilt mode is
activated the beam will automatically change its tilt
angle for each transmission ("ping"). The centre of the
tilt sector is defined by the chosen tilt angle just before
the
Auto Tilt mode is started. The chosen tilt sector is
shown on the tilt indicator in the Horizontal view using
a shaded background. The sector and step settings are
made using the
Tilt
function on the
Main
menu.
Off Centre
This is the same function as
Set New Ship Centre
on the shortcut menu. Place the
cursor anywhere in the view and press the button. The function moves the vessel
symbol to the selected position.
Zoom
Place the cursor anywhere in the view, right-click and select
Zoom
. Only one zoom
level is provided. Select
Zoom
one more time to restore the original view.
Menu Off
This is an "on/off" function. Unless you need to make frequent changes to the
operating parameters, you may want to hide the menu from the display presentation.
This gives you more space for echo information.
Setting to work