Kongsberg Simrad CS90, Справочное руководство

Страница: 618 / 686

616
442700/A
Fish Position page
The Fish Position information pane shows the position of the detected single fish echoes.
The information pane is only available when an Inspection view is "active". Use the
Fish
Position
page to set up the presentation parameters for the Fish Position information pane.
A The dotted inner circle identifies the low
frequency in the sweep.
B
The circle between them identifies the
centre frequency.
C The outer dotted circle identifies the high
frequency.
How to open
This page can be opened from several places
in the user interface. The page is opened in
the
Information Pane Options
dialog box. You
can also select the
Setup
button in the relevant
information pane.
The
Information Pane Options
dialog box is only available when an Inspection view is active.
Description
Each coloured circle in the
information pane identifies a
single fish. You can observe how
these move through the beam. The
colours used are the same as the
colours used in the colour scale,
and these indicate the echo strength
from each fish. This information
pane can be useful during trawling.
Keep an eye on the
Fish Position
information pane to make sure
that you can manoeuvre the trawl
through the areas with most fish.
Several specific parameters are
available for studies of single
fish. In order to detect single fish correctly, these parameters should be defined to suit
the specie characteristics.
Simrad CS90 Reference Manual