Kongsberg Simrad CS90, Справочное руководство, Страница: 478 / 686

476
442700/A
Range Projection function
The distance to a target located anywhere in the water column can be measured in two ways.
This can either be the horizontal distance to the target (
True ), or along the tilt angle ( Slant ).
The
Range Projection
function defines how this distance is measured.
How to open
This function is opened from the
Active
menu.
Description
Use the
Range Projection
function to control how the distance to a target is measured in a
horizontal view. This is a "selector" function.
1 Target
2 Select Slant range to measure
the distance to the target
diagonally along the tilt
angle.
3 Select True range to measure
the distance horizontally. This
is the distance you must sail
to position yourself on top of
the target.
Note
The map is only shown in
Horizontal views when
Range
Projection
is set to True.
Related topics
Functions and dialog boxes,
page 413
Active menu; Functions and dialog
boxes, page 461
Simrad CS90 Reference Manual