Kongsberg Simrad CP200-5C Скачать руководство пользователя страница 66 | Manualshive

Страница: 66 / 110

Kongsberg Simrad CP200-5C Скачать руководство пользователя страница 66

64

484164/A

Designing, manufacturing and mounting the
installation hardware

Once the physical location of the transducer has been determined, the installation hardware
must be designed, manufactured and mounted.

Prerequisites

Before you can do this task, the following prerequisites must be met:

• All relevant vessel and transducer drawings must be available.

• All relevant work instructions, procedures and standards must be available.

• The physical location of the transducer has been determined.

• The installation method has been determined.

• All relevant personnel (naval architects, designers, skilled shipyard workers) and tools

must be available.

Context

The installation shipyard must provide all necessary installation drawings. If required,
all documents provided by the shipyard for the physical installation of the CP200-5C
transducer must be approved by the vessel’s national registry and corresponding maritime
authority and/or classification society. The shipowner and shipyard doing the installation
are responsible for obtaining and paying for such approval.

The outline dimensions of the CP200-5C transducer and the relevant installation items
can be found in the

Drawing file

chapter in this manual. Relevant outline dimensions and

production drawings can be download from our website. The source drawings are available
in AutoCad format.

Procedure

1

Based on the vessel drawings, the physical properties of the hull, and the functionality
required by the CP200-5C transducer, design the mounting hardware.

2

Manufacture the hardware according to the relevant production standards.

Simrad CP200-5C Installation Manual

«
...
64
65
66
67
68
...
»

Содержание Simrad CP200-5C















































































































Отзывы:

Нет отзывов