Maintenance manual
KONGSBERG PROPRIETARY.
This document and its accompanying elements contain KONGSBERG
information which is proprietary and confidential. Any disclosure, copying, distribution or use is prohibited if not
otherwise explicitly agreed with KONGSBERG in writing. Any authorized reproduction, in whole or in part, must
include this legend. ©2022 KONGSBERG - All rights reserved.
P a g e
47 |
66
11.18
Adjustment of FU-Controller (if KONGSBERG delivery)
1.
Start the pumps from the main control
panel.
2.
Push the corresponding “IN COMMAND“
button [1] to engage the follow-up
controller.
3.
Operate the controller to mid-ship
command and make sure that the
rudder position to mid-ship position is
correctly aligned. If it is misaligned
loosen the clamp screw [2] adjust the 0-point and turn the potentiometer [3] until rudder mid-
ship position is correctly aligned.
4.
Operate the selector controller to 30 degrees port or starboard direction.
5.
Make sure that the rudder position is correctly aligned. If not, adjust the potentiometer.
6.
Tighten the clamp screw [2].
3
2
1
