Kongsberg MBR 144, Инструкция по эксплуатации

Страница: 29 / 74

G210–57/3
27
Checking the status of the MBR network
During operation you can check the status of the local radio site, the remote site(s) and
the entire network of radio sites.
Prerequisites
The radio site(s) must have been set up for operation. If not, there is no status information
to display.
Context
The status information is located to the left of the Main view. It is easily visible to the
operator.
Procedure
1 Look at the system status information to view the status about your local site.
The status is
Active
when the radio site is set up for operation. The status is
Not
configured
when the radio site is not set up for operation.
2 Look at the network information to view the status of the current radio network.
The current name and the frequency of the network are displayed.
3 Look at the
Site list
to view information about each site in the radio network.
The
Site list
holds information about your local site and remote radio sites.
BW
indicates the bandwidth resource allocated to the local radio site. The
Usage
bar
indicates the instantaneous usage of the bandwidth resource.
Operation