Kongsberg MBR 144, Инструкция по эксплуатации

Страница: 27 / 74

G210–57/3
25
Adding or removing equipment
If you want to communicate with other types of equipment, for example sensors, you can
add this equipment to your radio site. When third party equipment is no longer in use
on your site, you can remove it.
Procedure
1 On the
System
menu, select
Site
to enter the
Configure site
page.
2 Select
Manage Local Host List
to open the
Local Host List
dialog box.
3 Type the IP address of the equipment you want to connect. Select type of equipment
from the
Type
list. Type a description of the equipment for identification purposes.
If the third party equipment is switched on, the MAC address appears automatically.
If not, type the MAC address.
Select
Add
to add the equipment.
4 To remove equipment, select the X symbol at the end of the line.
5 Continue for all the equipment you want to add or remove. Select
OK
to close
the dialog box.
6 Back to the
Configure site
page. Select
OK
to save the chosen settings.
Related topics
Local Host List, page 42
Operation