Kongsberg M3 Sonar API, Инструкция по эксплуатации

Страница: 28 / 58

26
922-20007052/1.2
Finding a mode number
You can use the M3 Database Editor software to find a mode number for use in the
Set Mode
API command.
Prerequisites
• The M3 Database Editor software is not part of the M3 software application package.
You can obtain the M3 Database Editor software from Kongsberg Mesotech.
• Make sure that the M3 software is closed or that the M3 Sonar API is disabled.
Tip
If you wish to disable the M3 Sonar API without rebooting your PC, type taskkill
/im m3.exe /f at the command prompt.
Procedure
1 Open the M3 Database Editor software by double-clicking the “M3_DB_Editor.exe”
file.
2 Open the database.
a Click
File
→
Import DB
.
Observe that a
Browse For Folder
dialog box opens.
b Navigate to C:\KML\M3_V0240\DB
c Click
OK
.
Observe that a numbered list of modes appears.
M3 Sonar API Instruction Manual