Kongsberg EM 2040C, Руководство по обслуживанию

Страница: 61 / 124

378511/A
59
Remote Control using K-Rem
The Processing Unit can be switched on/off with a remote switch. This switch is
connected to a 9–pin D-connector on the Processing Unit. A dedicated junction box with
on/off switches and light indication has been designed for this purpose (K-Rem).
4
3
5
STANDBY GND
STANDBY 12 V
ON
(CD0806_701_01 1)
A B
33
32
34
STANDBY GND
STANDBY 12 V
ON
9 6
1 5
5 1
6 9
(CD0801_001_002)
A
Local connection, male 9–pin D-connector
B Connection at the terminal strip in Remote Control
Unit (K-Rem )
C
Female 9–pin D-connector
D
Male 9–pin D-connector
Minimum cable requirements
•
Conductors
: 3 x 0.5 mm²
•
Screen
: Overall braided
•
Voltage
: 60 V
•
Maximum outer diameter
: Defined by the plugs
This cable must be provided by the installation shipyard.
Cable layout and interconnections