Kongsberg cNODE Micro, Инструкция по эксплуатации, Страница: 47 / 56

426351/A
45
•
Cell manufacturer
: A123 Systems
•
Cell size
: 18650
•
Battery configuration
: 4S1P
•
Nominal capacity
: 1100 mAh/14.52 Wh
•
Equivalent Lithuim content
: 1.33 g
•
Certification
: UN 38.3
Note
For additional information about these cells, see the safety data sheet provided by the
cell manufacturer.
Section 4: First aid measures
The battery will release toxic fumes if burned or exposed to fire. If subjected to gas from
a burning transponder or battery, remove source of contamination or move victim to
fresh air. In all cases, seek immediate medical attention.
Inhalation: Remove from exposure, rest and keep
warm.
Skin contact: Wash off skin thoroughly with water and
soap for at least 15 minutes. Remove
contaminated clothing and wash it before
reuse.
Eye contact: Irrigate thoroughly with water for at least
15 minutes.
Ingestion: Wash out mouth thoroughly with water
and give plenty of water to drink.
Section 5: Firefighting measures
The transponder in which the battery pack is used is designed with an overpressure vent
to the internal battery pack. Nonflammable material are used. In case of fire, move
transponder from fire area if you can do it without risk. Extreme mechanical, thermal or
electrical abuse to the transponder may result in ruptured seal, and expose the battery.
The individual cells in the battery pack contain flammable liquid electrolyte that may
vent, ignite and produce sparks when subjected to high temperatures (> 150 °C (302 °F)),
when damaged or abused. A burning battery can ignite other batteries in close proximity.
Suitable extinguishing media are dry chemical, CO2, water spray or regular foam. Cool
down the battery/transponder with copious amounts of cold water.
Battery safety