Kongsberg cNODE Maxi, Инструкция по эксплуатации

Страница: 43 / 98

322217/G
41
Adding weight to the release unit
This is how the anchor weight can be attached to the transponder before operation.
Steel shackle
Use a stainless steel D-shackle to connect the rope, soft or web lifting sling to the
release mechanism.
Note
Maximum material thickness used in the D-shackle is 15 mm.
Using rope, soft or web lifting sling directly to the release mechanism might jam the
release hook, and the transponder could fail to release/open.
Always use a cable tie or safety wire to secure the pin at the shackle.
A
10 mm
B
17 mm
C 16 mm
D
10 mm
It is recommended to use a minimum of 2
m of rope, soft or web lifting sling between
the D-shackle attached to the release unit
and the weight to avoid corrosion.
Another option is to use a minimum of 1
m of rope, soft or web lifting sling between
the D-shackle attached to the release unit
and a minimum of 1 m of wire or chain
attached to the weight.
Getting started