Konex Audio K-multi6, Руководство пользователя, Страница: 6 / 8

INSTALLATION
Speaker Array Only
1 Spacer
2 Spacers
CONNECTIONS
1- Connect the OUTPUT from your signal source ( mixing console, microphone, preamp, line-level
source) directly to the INPUT connector on the back of the speaker. It accepts balanced line level signals
from mixers, preamplifiers, etc., and accepts direct connections from dynamic microphones through the
MIC input.
2- There also an XLR OUTPUT connector «LINE OUT». This allows you to connect more than one
KONEX-Multi6 to the output of your source. Simply plug an XLR cable from the LINE OUT connector of
one speaker to the INPUT connector of another speaker, and so on, daisy-chainning multiple speakers.
3- Turn ON your signal source ( Make sure the volume is turned down) Start signal source and adjust
volume controls on the signal source and KONEX-multi6 speaker.