Komatsu WB93R-5, Руководство по эксплуатации и техническому обслуживанию

Страница: 51 / 284

TRANSPORTING THE MACHINE ON OTHER VEHICLES
49
2.5 TRANSPORTING THE MACHINE ON OTHER VEHICLES
2.5.1 LOADING AND UNLOADING THE
MACHINE
q
Loading and unloading the machine on-off a motor vehicle
always involves potential hazards. Proceed with extreme
care.
q
The loading and unloading of the machine on-off the means
of transport must be carried out on a flat surface and at a
safety distance from the edges of ditches or from the road
side.
q
If the vehicles used have not been appositely equipped, put
support blocks under the ramps, in order to avoid any bend-
ing.
q
Always lock the wheels of the transporting vehicle with
wedges.
q
Always use ramps that are sufficiently wide and can support
the weight of the machine. The longitudinal axes of the
ramps must be parallel to each other and perpendicular to
the loading side board and their distance must be suitable
for the tread of the machine.
q
Make sure that the ramps are securely positioned and fas-
tened to the loading board and that they have the same
length.
q
Position the ramps with a maximum inclination of 15°.
q
Make sure that the ramp surface is clean and there is no
trace of grease, oil, soil and ice; remove dirt from the wheels
before starting to load the machine on the vehicle.
q
The machine must be loaded on the vehicle with the bucket
directed forwards, that is, in the direction of advancement of
the vehicle.
q
Do not correct the trajectory of the machine on the ramps. If
necessary, get down the ramps and start the operation
again.
q
After loading the machine, block its wheels with wedges and
secure it with tie-downs or chains that prevent even any
sideward shift (see "3.9 TRANSPORTING THE MACHINE
ON OTHER VEHICLES").
2.5.2 TRANSPORT
CAUTION
q
During transport, the machine must be secured to the vehicle, with closed doors and windows.
q
Define the route to be followed, taking in consideration the width, height and weight of the transport means and
of the machine.
Make sure that the dimensions of the machine are compatible with the road and any galleries, subways, bridges,
electric and telephone lines, etc.
q
Keep to the regulations in force regarding the permissible width, height, weight of the machine and the transport
speed.
Ramps
Blocks
Blocks
RWA00240
Max.15˚
https://tractormanualz.com