Komatsu WA900-3E0, Брошюра

Страница: 6 / 6

10 11
S
PECIFICATIONS
WHEEL LOADER
WA900
-3E0
W
H E E L
L
O A D E R
AXLES AND FINAL DRIVES
Drive system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Four-wheel drive
Front . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Fixed, full-floating
Rear . . . . . . . . . . . . . . . . . . . . . . . . .Center-pin support, full-floating,
22 ˚ total oscillation
Reduction gear . . . . . . . . . . . . . . . . . . . . . . . . . . . .Spiral bevel gear
Differential gear . . . . . . . . . . . . . . . . . . . . . . . . . .Straight bevel gear
Final reduction gear . . . . . .Planetary gear, single reduction, oil bath
BRAKES
Service brakes . . . . . . . . . . . . . . . . . . . . . . . .Hydraulically actuated,
wet disc brakes actuate on four wheels
Parking brake . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Dry disc brake
Emergency brake . . . . . . . . . . . . . .Parking brake is commonly used
1st 2nd 3rd
Forward 7.0 4.3 12.3 7.6 28.0 17.4
Reverse 7.1 4.4 12.4 7.7 28.3 17.6
15.0 11.5
High lift Boom
Standard Boom
Excavating Bucket (spade nose)
with teeth
115 100 95%
Bucket fill factor
17.0 13.0
Rock Bucket (spade nose)
with teeth
m
3
yd
3
Bucket capacity: m
3
yd
3
2023 2360 2698 3035 3372
1200 1400 1600 1800 2000
Material density: kg/m
3
lb/yd
3
lb/yd 3
kg/m
3
ENGINE
Model . . . . . . . . . . . . . . . . . . . . . . . . . . . .Komatsu SAA12V140E-3
Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Water-cooled, 4-cycle
Aspiration . . . . . . . . . . . . . . . . . .Turbocharged, air-to-air aftercooled
Number of cylinders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Bore x stroke . . . . . . . . . . . . . . . . .
140 mm x 165 mm 5.51" x 6.50"
Piston displacement . . . . . . . . . . . . . . . . . . . . . . . 30.48 ltr 1860 in 3
Governor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .all-speed, electronic
Flywheel horsepower
SAE J1995 . . . . . . . . . . . . . . . . . . . . . . . . .Gross 672 kW 900 HP
ISO 9249/SAE J1349 . . . . . . . . . . . . . . . . . . .Net 638 kW 856 HP
Rated rpm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2050 rpm
Fan drive method for radiator cooling . . . . . . . . . . . . . . . .Mechanical
Fuel system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Direct injection
Lubrication system:
Method . . . . . . . . . . . . . . . . . . . . . . . .Gear pump, force-lubrication
Filter . . . . . . . . . . . . . . . . . . . . . . . Full-flow and bypass combined
Air cleaner . . . . . . . . . . . . . . . . .Dry type with automatic dust ejector
and pre-cleaner, cyclopac with vacuator
TRANSMISSION
Torque converter:
Type . . . . . . . . . . . . . . . . . . . .3-element, single-stage, single-phase
Transmission:
Type . . . . . . . . . . . . . . . . . . . . . . . . .Full-powershift, planetary type
Travel speed: km/h mph
Measured with 45/65-45-58 tires
HYDRAULIC SYSTEM
Steering system:
Hydraulic pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Piston pump
Capacity . . . . . . . . . . . .
315 ltr/min 83.2 U.S. gal/min at rated rpm
Relief valve setting . . . . . . . . . . . . 34.3 MPa 350 kgf/cm 2 4,977 psi
Hydraulic cylinders:
Type . . . . . . . . . . . . . . . . . . . . . . . . . .Double-acting, piston type
Number of cylinders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Bore x stroke . . . . . . . . . . . . . . 160 mm x 503 mm 6.3" x 19.8"
Loader control:
Hydraulic pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Piston pump
Capacity . . . . . . . . . . . . . . . . . . . . .
415 ltr/min 109.6 U.S. gal/min
at rated rpm
Relief valve setting . . . . . . . . . . . . 34.3 MPa 350 kgf/cm 2 4,977 psi
Hydraulic cylinders:
Type . . . . . . . . . . . . . . . . . . . . . . . . . .Double-acting, piston type
Number of cylinders—bore x stroke:
Boom cylinder . . . . . . . . .2- 260 mm x 1368 mm 10.2" x 53.9"
Bucket cylinder . . . . . . . . . .1- 300 mm x 906 mm 11.8" x 35.7"
Control valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Spool type
Control positions:
Boom . . . . . . . . . . . . . . . . . . . . . . . .Raise, hold, lower, and float
Bucket . . . . . . . . . . . . . . . . . . . . . . . . .Tilt-back, hold, and dump
Hydraulic cycle time (rated load in bucket)
Raise . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11.2 sec
Dump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2.0 sec
Lower (Empty) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4.8 sec
ROPS / FOPS & CAB
Structure complies with ISO 3471 ROPS (Roll-Over Protective
Structure) standards, as well as ISO 3449 FOPS (Falling Object
Protective Structure) standards. The cab is mounted on rubber pads
and is well insulated.
SERVICE REFILL CAPACITIES
Cooling system . . . . . . . . . . . . . . . . . . . . . . . . 337 ltr 89.0 U.S. gal
Fuel tank . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1555 ltr 410.8 U.S. gal
Engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130 ltr 34.3 U.S. gal
Hydraulic system . . . . . . . . . . . . . . . . . . . . . . . 725 ltr 191.5 U.S. gal
Axle (each front and rear) . . . . . . . . . . . . . . . . 360 ltr 95.1 U.S. gal
Torque converter and transmission . . . . . . . . . 140 ltr 37.0 U.S. gal
BUCKET SELECTION GUIDE
STEERING SYSTEM
Type . . . . . . . . . . . . . . .Articulated type, full-hydraulic power steering
Steering angle . . . . . . . . . . . . . . . . . . . . . . . . . . .40
˚ each direction
Minimum turning radius at
the center of outside tire . . . . . . . . . . . . . . . . . . . . . .
9200 mm 30'2"
Standard boom High lift boom
Excavating Bucket Excavating Bucket
Spade nose Spade nose
Tipteeth teeth
Bucket capacity: heaped 13.0 m 3 11.5 m 3
17.0 yd 3 15.0 yd 3
struck 11.0 m 3 9.7 m 3
14.4 yd 3 12.7 yd 3
Bucket width 4810 mm 4810 mm
15'9" 15'9"
Bucket weight 12330 kg 11370 kg
27,180 lb 25,070 lb
Dumping clearance, max. height 4640 mm 5255 mm
and 45˚ dump angle 15'3" 17'3"
Reach at max. height and 45˚ dump angle 2450 mm 2235 mm
8' 7'4"
Reach at 2130 mm (7') clearance 3650 mm 4020 mm
and 45˚ dump angle 12' 13'2"
Reach with arm horizontal and bucket level 4640 mm 4760 mm
15'3" 15'7"
Operating height (fully raised) 9680 mm 9875 mm
31'9" 32'5"
Overall length 14490 mm 14685 mm
47'6" 48'2"
Loader clearance circle (bucket at carry, 22000 mm 22200 mm
outside corner of bucket) 72'2" 72'10"
Digging depth: 0˚ 165 mm 160 mm
6.5" 6.3"
10˚ 645 mm 610 mm
2'1" 2'0"
Static tipping load: straight 65670 kg 62540 kg
144,780 lb 137,880 lb
40˚ full turn 57430 kg 55030 kg
126,610 lb 121,320 lb
Breakout force 666 kN 703 kN
67900 kgf 71700 kgf
149,690 lb 158,070 lb
Operating weight 107200 kg 107350 kg
236,340 lb 236,670 lb
DIMENSIONS
D
A
E
F
G
C
B
50
°
All dimensions, weights, and performance values based on SAE J732c and J742b standards.
Static tipping load and operating weight shown include lubricant, coolant, full fuel tank, ROPS canopy, air conditioner, bucket and operator. Machine stability and
operating weight are affected by counterweight, or ballast, tire size, and other attachments.
Use either counterweight or ballast, not both. Apply the following weight changes to operating weight and static tipping load.
Measured with 45/65-45-58PR(L-5) tires
WA900
-3E0
Standard High lift
Boom Boom
Tread 3350 mm 11'
Width over tires 4585 mm 15'1"
A Wheelbase 5450 mm 17'11"
B Hinge pin height, max. height 6960 mm 22'10" 7445 mm 24'5"
C Hinge pin height, carry position 800 mm 2'7"
D Ground clearance 550 mm 1'10"
E Hitch height 1390 mm 4'7"
F Overall height, top of the stack 5130 mm 16'10"
G Overall height, ROPS cab 5275 mm 17'4"