Komatsu WA800-3E0, Руководство по эксплуатации и техническому обслуживанию

Страница: 127 / 336

OPERATION
EXPLANATION OF COMPONENTS
3-65
HANDLING WIRELESS 3
NOTICE
The engine service monitor is installed under the lunchbox, so do not place any wireless device on top of
the lunchbox.
METHOD OF INSTALLING WIRELESS 3
When installing the wireless, there is mounting seat (2) under cover (1) at the rear right of the cab. (M10 x 4)
There are 30 mm holes at 4 places in the steel plate inside the mounting cover. Press with your finger to find the
open place.
Make 30 mm holes at 4 places in the interior lining stuck to the cover, then install the wireless.
Make the mounting bracket for the wireless locally.
Cover
Mounting seat
(base plate)
Nut (M10)
Steel plate for cover
Lining of cover
12.2 mm Drill
Diameter:
26 mm
Min: 8 mm
6.5 mm (Lining)
Diameter: 12.5 mm (B
as
e pl
a
te
)
Diameter : 30
mm
(S
teel
p
late
portion
)
4.5 mm (Base plate)
1.2 mm (Steel plate)
A -A (4 PLACES)
Recommendation for mounting bracket
for wireless equipment