Komatsu WA70-7, Руководство по эксплуатации и обслуживанию

Страница: 101 / 302

Operation 3.2 Descriptions of the individual elements
WA70-7 – VENAM02003
3-27
20. Direction selector switch
Use this switch to change the machine's direction of travel. The
selected direction of travel is displayed on the machine monitor.
NOTICE
Starting the engine is possible only if the direction selector
switch is in the neutral position 'N'.
21. E.C.S.S. switch with pilot lamp
(Option)
Use this switch to turn on the E.C.C.S.
The lamp in the switch is lit when speed range 2 is active.

If the machine is travelling at a speed higher than 5 km/h,
the E.C.S.S. is activated automatically and the E.C.S.S. pilot
lamp on the machine monitor lights up.

If the machine is travelling slower than 5 km/h, the E.C.S.S.
circuit is deactivated and the pilot lamp on the machine mon-
itor goes out. The pilot lamp in the E.C.S.S. switch remains
on.
22. Auto-inch
(Option)
When the hydraulic back pressure in the work equipment is too
high while loading, the tractive force of the drive is reduced until
the work equipment can be raised again.
NOTICE
Always turn this switch off when driving on roads.
Position F = Forward
Position N = Neutral position
Position R = Reverse
G0070432
G0070424