Komatsu WA480-8 Скачать руководство пользователя | Manualshive

Страница: 58 / 440

background image

PRECAUTIONS FOR MAINTENANCE

PRECAUTIONS BEFORE STARTING INSPECTION AND MAINTENANCE

DISPLAY WARNING TAG DURING INSPECTION AND MAINTENANCE

During inspection and maintenance, always display the “DAN-
GER! Do NOT operate!” warning tag.
If  there  is  a  “DANGER!  Do  NOT  operate!”  warning  tag  dis-
played,  it  means  that  someone  is  performing  inspection  and
maintenance of the machine. If the warning tag is ignored and
the  machine  is  operated,  the  person  performing  inspection  or
maintenance  may  be  caught  in  the  rotating  parts  or  moving
parts. It is dangerous and may cause serious personal injury or
death. Do not start the engine or touch the levers.
If necessary, put up signs around the machine as well.
Warning tag part No. 09963-A1640
When not using this warning tag, keep it in the toolbox. If there
is  no  toolbox,  keep  it  in  the  pocket  for  Operation  and  Mainte-
nance Manual.

KEEP WORK PLACE CLEAN AND TIDY

Do not leave hammers or other tools lying around in the work place. Wipe up all grease, oil, or other substances
that will cause you to slip. Always keep the work place clean the tidy to enable you to perform operations safely.
If the work place is not kept clean and tidy, there is the danger that you will trip, slip, or fall over and injure your-
self.

SELECT SUITABLE PLACE FOR INSPECTION AND MAINTENANCE

• Stop the machine on a firm, level ground.
• Select a place where there is no hazard of landslides, falling rocks, or flooding.

ONLY AUTHORIZED PERSONNEL

As long as maintenance of the machine is continued, do not allow unauthorized person to come near the work-
place. They might get unexpected personal injury from, for instance, touching machine. Do not allow anyone
except the workers concerned to enter the workplace. If necessary, employ a guard.

APPOINT LEADER WHEN WORKING WITH OTHERS

When repairing the machine or when removing and installing the work equipment, appoint a leader and follow
his/hers instructions during the operation in order to prevent personal injuries caused by being caught or
pinched.

STABILITY

• When dismantling or assembling the machine for the purpose of maintenance, repair or transportation, al-

ways ensure that at each stage of the process, care is taken to ensure that the machine remains stable.
Failure to do this could result in serious injury or death.

PRECAUTIONS FOR MAINTENANCE

SAFETY

2-32

«
...
56
57
58
59
60
...
»

Содержание WA480-8

























































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для WA480-8

Бренд: Takeuchi Страницы: 182

Бренд: Toro Страницы: 16

Бренд: Toro Страницы: 16

Бренд: Shini Страницы: 29

SAL-700G Series

Бренд: Shini Страницы: 34

Бренд: Bush Hog Страницы: 42

Бренд: Bush Hog Страницы: 102

Бренд: Bush Hog Страницы: 106

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды