Komatsu WA470-6 2006, Руководство по эксплуатации и техническому обслуживанию

Страница: 185 / 392

Operation 3.3 Operation
WA470-6H – VEAM946100
3-113
3.3.4 Stopping engine
NOTE
If the engine is abruptly stopped before it has cooled down,
engine life may be greatly shortened. Consequently, do not
abruptly stop the engine except for an emergency.
In particular, if the engine has overheated, do not abruptly stop it
but run it at medium speed to allow it to cool gradually, then stop
it.
1. Run the engine at low idling for about 5 minutes to cool
down gradually.
2. Turn the key of starting switch (1) to the OFF position (A) to
stop the engine.
3. Remove the key from starting switch (1).
3.3.5 Check after stopping engine
1. Walk around the machine and check the work equipment,
bodywork, and undercarriage, and check also for oil and
water leakage.
2. Fill the fuel tank.
3. Check the engine compartment for paper and debris. Clean
out any paper and debris to avoid a fire hazard.
4. Remove any mud affixed to the undercarriage.
GK038080
1
GK038021
A
B
C