Komatsu WA250PT-5H Скачать руководство пользователя страница 50 | Manualshive

Страница: 50 / 255

Komatsu WA250PT-5H Скачать руководство пользователя страница 50

Precautions for maintenance

SAFETY

Safety instructions

2-28

Precautions for maintenance

0.

Safety instructions

0.

Warning tag

0.

Always attach the “DO NOT OPERATE“ warning tag to the
work equipment control lever in the operator's cab to alert
others that you are performing service or maintenance on
the machine. Attach additional warning tags around the
machine if necessary.

Warning tag
Keep this warning tag in the tool box while it is not used. If
there is not the tool box, keep the tag in the operation man-
ual pocket.

If others start the engine, or touch or operate the work
equipment control lever while you are performing service or
maintenance, you could suffer serious injury or property
damage.

Keep work place clean and tidy

0.

Do not leave hammers or other tools lying around in the work
place. Wipe up all grease, oil, or other substances that will
cause you to slip. Always keep the work place clean the tidy to
enable you to carry out operations safely. If the work place is
not kept clean and tidy, there is the danger that you will trip,
slip, or fall over and injure yourself.

Appoint leader when working with others

0.

When repairing the machine or when removing and installing
the work equipment, appoint a leader and follow his instruc-
tions during the operation.
When working with others, misunderstandings between work-
ers can lead to serious accidents.

9JA04836-1

«
...
48
49
50
51
52
...
»

Содержание WA250PT-5H
































































































































































































































































Отзывы:

Нет отзывов