Komatsu WA250PT-5H, Руководство по эксплуатации и техническому обслуживанию, Страница: 204 / 255

Service procedure
MAINTENANCE
When required
4-30
Check window washing fluid level, add fluid 0.
Check the washing fluid levels in washer tank (1). When the
fluid has run low, add automotive window washing fluid.
Be careful not to let dust get into the fluid.
Clean radiator fins and cooler fins 0.
WARNING
Never open the engine side cover when the engine is running. Stop the engine completely before
starting the cleaning operation.
If compressed air, pressurized water, or steam hits your body directly, or causes dirt to fly, it may lead
to personal injury. Always wear safety glasses, dust mask, or other protective equipment.
Clean the radiator or cleaner if mud or dirt is stuck to it.
1. Open rear grill (1).
2. Move lever (3) of fan guard (2) down to release the lock,
then open fan guard (2).
3. Use compressed air to clean the mud, dust, and leaves
from the radiator and oil cooler fins. Steam or water may be
used instead of compressed air.
NOTICE
If the steam jet nozzle is brought too close to the radiator
fins, it may damage the fins, so keep the nozzle a suitable
distance away from the fins when cleaning.
4. Check the rubber hose. Replace with a new one if the hose
is found to have cracks or to be hardened by ageing.
Also, check hose clamps for looseness.
5. After cleaning, close fan guard (2), apply the lock, then
close rear grill (1).