Komatsu WA250PT-5H, Руководство по эксплуатации и техническому обслуживанию

Страница: 100 / 255

Explanation of components
OPERATION
Cap and cover with lock
3-42
Cap and cover with lock 0.
Use the starting key to open and close the locks on the caps
and covers.
For details of the locations of the caps and covers with locks,
see “Locking on page 3-95“.
Insert the key as far as it will go, then turn it. If the key is turned
before it is inserted fully, it may break.
Method of opening and closing cap with lock 0.
(For the fuel tank filler port)
To open the cap 0.
1. Insert the key into the key slot.
2. Turn the key clockwise, align the key slot with the match
mark on the cap, then open the cap.
To lock the cap 0.
1. Turn the cap until tight, then insert the key into the key slot.
2. Turn the key counterclockwise and take the key out.
Method of opening and closing cover with lock 0.
(Engine side cover)
To open the cover 0.
1. Insert the key into the key slot.
2. Turn the key counterclockwise and open the cover by pull-
ing the cover grip.
To lock the cover 0.
1. Close the cover and insert the key into the key slot.
2. Turn the key clockwise and take the key out.
AW35805B-A
Shoulder
AW36171B-A
Match mark
Open
Lock
9EH00425A
Open
Lock