manualshive.com logo in svg

Komatsu PC80MR-5E0, Руководство по эксплуатации и техническому обслуживанию

Поделиться
Скачать
Komatsu PC80MR-5E0 Скачать руководство пользователя страница 306

METHOD FOR CHECKING GAS SPRING

k

k

 WARNING

The gas spring is charged with high-pressure nitrogen gas, so improper handling may cause an explo-
sion resulting in serious personal injury or death. When handling, always observe the following.

• Do not disassemble.
• Do not bring open flame close to it or do not dispose of it in fire.
• Do not perform drilling, welding or flame-cutting.
• Do not hit or roll it, or subject it to any impact.
• When disposing of it, the gas must be released. Ask your Komatsu distributor to perform this work.

 

Gas  springs  are  installed  inside  the  left  console  (1  place),  at
the cab front window (1 place each on right and left), inside the
dirt cover (1 place) and inside the engine hood (1 place).
In the following cases, ask your Komatsu distributor for inspec-
tion, repair, and replacement.

• It is heavy to pull up the lock lever, or to open the cab front

window, dirt cover and engine hood.

• The lock lever does not stay at LOCK position.
• Oil or gas is leaking from the gas spring.

RKA68840

RKA68850

MAINTENANCE PROCEDURE

MAINTENANCE

4-40

WENAM00241

Содержание PC80MR-5E0





























































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды