Komatsu PC80MR-5E0, Руководство по эксплуатации и техническому обслуживанию

Страница: 124 / 412

REMARK
• When the machine is in the environment where the radio waves from GPS cannot be received, such as
inside of a building, the automatic adjustment may not function.
• While “GPS Synchronization” is turned “ON”, the item of “Calendar” and “Time” cannot be selected.
CALENDAR SETTING
Perform the setting of calendar after starting the engine.
The date of the machine monitor can be adjusted on “Calendar” screen.
REMARK
As long as “GPS Synchronization” is turned “ON”, item in “Calendar” is not selectable.
1.
Select “Calendar” on “Clock Adjustment” menu screen,
and then press function switch “F4”.
2.
“Calendar” screen is displayed.
Change the date of calendar according to the following op-
eration.
You can change the numeral displayed in yellow.
Function switch “F1”
Puts back the numeral by 1.
Function switch “F2”
Advances the numeral by 1.
Function switch “F3”
Cancels the date change and returns the screen to “Clock Adjustment” screen.
Function switch “F4”
Allocates the date change and returns the screen to “Clock Adjustment” screen.
Function switch “F6”
Moves to left display.
When on the year display, it moves to the date display.
Function switch “F7”
Moves to the right display.
When on the date display, it moves to the year display.
TIME SETTING
Perform the setting of the time after starting the engine.
The time of the machine monitor can be adjusted on “Time” screen.
REMARK
As long as “GPS Synchronization” is turned “ON”, you cannot select the item of “Time”.
EXPLANATION OF COMPONENTS OPERATION
3-56
WENAM00241