Komatsu PC700LC-11, Руководство по эксплуатации и техническому обслуживанию

Страница: 38 / 442

PRECAUTIONS RELATED TO PROTECTIVE STRUCTURES
The operator's compartment is equipped with a structure (such
as FOPS) to protect the operator by absorbing the impact ener-
gy.
Also, if the function of the protective equipment is impeded, the
protective equipment will not be able to protect the operator,
and the operator may suffer injury. Always observe the follow-
ing.
• This machine is not equipped with a ROPS (roll over pro-
tective structure) cab.
• If the machine is equipped with a protective structure, do
not remove the protective structure and perform operations
without it.
• If the protective structure is welded, or holes are drilled in it, or it is modified in any other way, its strength
may drop. Any modification is prohibited.
• If the protective structure is damaged or deformed by falling objects or by rolling over, its strength will be
reduced and it will not be able to fulfill its function properly. In such cases, always consult your Komatsu
distributor.
• Even if the protective structure is installed, always fasten your seat belt properly when operating the ma-
chine. If you do not fasten your seatbelt properly, it cannot display its effect.
Always fasten your seat belt while operating the machine.
PROTECTION AGAINST FALLING, FLYING OR INTRUDING OBJECTS
On jobsite where there is a danger of falling objects, scattering
fragments, and things which may intrude into operator's cab, in-
stall the necessary equipment to protect the operator depend-
ing on the working conditions.
• When operating on jobsite, such as mines or quarries
where there is a hazard of falling rocks, install falling object
protective structure (FOPS) and a front guard, and always
keep all the windows and doors closed when operating. In
addition, always check that there is no one except the op-
erator in the surrounding area where there is a danger of
falling objects, scattering fragments.
• When performing demolition or breaker operations, install
a front guard and always keep all the windows closed dur-
ing operation. In addition, always check that there is no
one except the operator in the surrounding area where
there is a danger of falling objects, scattering fragments.
Above precautions are developed for the standard jobsite. De-
pending on the conditions of the jobsite, installation of addition-
al guards is necessary.
Do not operate the machine without the necessary guards. Be
sure to consult with your Komatsu distributor about necessary
guards.
UNAUTHORIZED MODIFICATION
• Komatsu will not be responsible for any personal injuries, product failures, physical loss or damage, or influ-
ence on the environment resulting from modifications made without authorization from Komatsu.
• Any modification made without authorization from Komatsu can create hazards. Before making a modifica-
tion, consult your Komatsu distributor.
,&
,&
,&
GENERAL PRECAUTIONS COMMON TO OPERATION AND MAINTE-
NANCE
SAFETY
2-18