Komatsu PC45MR-30403, Руководство по эксплуатации и обслуживанию

Страница: 429 / 475

METHOD FOR OPERATING ATTACHMENT
CHECK POINTS WHEN USING BREAKER
• Is selector valve (1) in position (b) for breaker (1 way)?
If it is not in position (b) for breaker (1 way), turn it to the
position.
• Is engine output set at 80 %?
• Do you replace the hydraulic oil and its filter element at intervals shorter than the standard?
The deterioration of the hydraulic oil when using the breaker is much faster than in the normal operations,
so check the maintenance time by referring to “MAINTENANCE INTERVAL FOR HYDRAULIC BREAKER”.
• When handling the breaker, follow the instruction manual from the manufacturer and use the breaker cor-
rectly.
METHOD FOR OPERATING MACHINE WHEN WORKING MODE IS NOT IN
BREAKER MODE
If the working mode display does not indicate the breaker mode, set it to breaker mode according to the follow-
ing procedure.
1.
Press function switch “F5” on the standard screen.
“Working Mode” screen is displayed.
2.
Select breaker mode “B” with function switches “F1” or
“F2” or “F5”.
3.
While breaker mode “B” is selected, press function switch
“F4” or leave it as it is for 5 seconds.
Working mode is set to breaker mode “B”, and the screen
returns to the standard screen.
REMARK
To return to the standard screen without changing the
working mode, press function switch “F3”.
ADJUST BREAKER OIL FLOW RATE
• Breaker flow rate can be adjusted in 15 levels (“15” to “1”).
“15” is the maximum flow rate and “1” is the minimum flow rate.
Approximately 4 ℓ/min per level can be changed.
• For the adjustment method of breaker flow rate, see “BREAKER SETTING”.
HANDLE MACHINE READY FOR INSTALLATION OF ATTACHMENT ATTACHMENTS AND OPTIONS
6-12