Komatsu PC22MR-3, Руководство по эксплуатации и техническому обслуживанию

Страница: 119 / 312

FUNCTIONING
CAPS AND COVERS WITH LOCK
3-31
CAPS AND COVERS WITH LOCK 3
Use the ignition key to open and close the caps and covers
with lock.
For details on the position of caps and covers with lock, see
"LOCKING THE MACHINE (3-89)".
Introduce the key completely (6 mm from the point where the
key narrows), then turn it. If the key is turned when it is inserted
only partially into the lock, it may break.
Opening and closing of lockable caps 3
Opening
1. Insert the key into the lock.
2. Turn the key anticlockwise and open the cap.
Closing
1. Tighten the cap thoroughly and insert the key into the lock.
2. Turn the key clockwise and extract it.
Opening and closing the covers with lock 3
Opening
1. Insert the key into the lock.
2. Turn the key clockwise and open the bonnet by pulling the
handle.
Closing
1. Close the cover and insert the key into the lock.
2. Turn the key counterclockwise and extract it.
Cab door lock opening and closing 3
Opening
1. Insert the key into the lock.
2. Turn the key anticlockwise and open the cab door by pulling the opening handle.
Closing
1. Close the cover and insert the key into the lock.
2. Turn the key clockwise and extract it.
WEAM014500