Komatsu PC210-10 DEMOLITION BASE SPEC., Руководство по эксплуатации и техническому обслуживанию, Страница: 433 / 458

ATTACHMENTS AND OPTIONS ATTACHMENTS AND OPTIONS
6–35
BUCKET TEETH SELECTION
BUCKET TEETH SELECTION:PC-LBM0-05AK00A
Depending on the working conditions, there is a danger that an adapter and tooth may be lost. Select either one
from the vertical pin type of tooth or horizontal pin type of tooth that is suitable for the purpose.
While the standard teeth of both vertical and horizontal pin types may be used widely, the following kinds of teeth
are recommended depending on the working conditions.
VERTICAL PIN TYPE TOOTH
Vertical Pin Type Tooth:PC-LBM0-05AK02A
General digging: Digging and loading normal soil, such as sand, gravel, clay, etc.Light-duty digging: digging and
loading dry and loose sandy soil, or muddy soil.Loading: loading of dry and loose earth.
HORIZONTAL PIN TYPE TOOTH
Horizontal Pin Type Tooth:PC-LBM0-05AK03A
Heavy-duty digging: Digging and hammering work on hard soil, soil with rocks, scraping or other heavy-duty work
q
The heavy-duty bucket is of a horizontal pin type and as such, use it for heavy duty-digging.
LONG-LIFE TOOTH
Long-life Tooth:PC-LBM0-05AK04A
q
Jobsites where long wear life is required, such as when loading hard rocks.
q
Jobsites where no penetration is needed, such as when working with crushed rocks after blasting or ripping.
q
Jobsites where heavy-duty operations are carried out, such as hitting or pulling up rocks with the tips of the
teeth.
SELF-SHARPENING TOOTH (HORIZONTAL PIN TYPE, VERTICAL PIN TYPE)
Self-sharpening Tooth (Horizontal Pin Type, Vertical Pin Type):PC-LBM0-05AK05A
q
Jobsites requiring penetration such as digging and loading sandy or clayey soil.
SELECTION GUIDE FOR HORIZONTAL OR VERTICAL PIN TYPE TOOTH
Selection Guide for Horizontal or Vertical Pin Type Tooth:PC-LBM0-05AK06A
Applicable Work Site
Rock Crushed stone
Clayey soil,
Decompressed
weathered granite
Sand
W
ork Conten
ts
L
ight
io
He
av
y
Digging with hammer-
ing work
Horizontal pin type teeth
Horizontal pin type teeth
Vertical pin type teeth
Scraping down Horizontal pin type teeth
Horizontal pin type teeth
Vertical pin type teeth
General excavation
Horizontal pin type teeth
Vertical pin type teeth
Loading
Horizontal pin type teeth
Vertical pin type teeth