Komatsu PC210-10 DEMOLITION BASE SPEC., Руководство по эксплуатации и техническому обслуживанию

Страница: 406 / 458

AUTOMATIC GREASE SYSTEM ATTACHMENTS AND OPTIONS
6–8
DIAGRAM OF GREASING POINTS
SYSTEM PERFORMANCE
The system performs all operations automatically. When the
starting switch is in the ON position the grease pump will, at
pre-defined intervals, supply measured quantities of grease to
all the points connected to the system.
Within 60 seconds after switching the starting switch to the ON
position the in-cab display (2) shows the selected greasing
interval by flashing green lamp (4).
(A): Light Duty greasing interval
(B): Normal Duty greasing interval
(C): Heavy Duty greasing interval
CHANGING THE GREASE INTERVAL WITH THE IN-CAB DISPLAY
q
Make sure the ignition is switched on.
q
Select the interval required by pushing button (3) on the in-
cab display (2).
No. part
1 Swing circle
2 Boom cylinder foot pin
3 Boom foot pin
4 Boom cylinder rod end
5 Arm cylinder foot pin
6 Boom arm coupling
7 Arm cylinder rod end
8 Bucket cylinder foot pin
9
Bucket cylinder rod end (may not be available with
some specifications)
10
Bucket—link coupling pin (may not be available with
some specifications)
11 Arm-bucket coupling pin
12 Arm-link coupling pin
13
Link coupling pin (may not be available with some
specifications)