Komatsu PC210-10 DEMOLITION BASE SPEC., Руководство по эксплуатации и техническому обслуживанию

Страница: 405 / 458

ATTACHMENTS AND OPTIONS AUTOMATIC GREASE SYSTEM
6–7
AUTOMATIC GREASE SYSTEM
AUTOMATIC GREASE SYSTEM:PC220_KU-Q850-100K00A
The machine may be equipped with an automatic greasing system. The system will automatically lubricate all
points connected to the system on a timed cycle, with the correct quantity of grease.
RECOMMENDED GREASE
q
Komatsu genuine grease is provided to maintain reliability and durability of Komatsu construction equipment
and components.
q
In order to keep you machine in the best condition for long periods of time, it is essential to follow the instruc-
tions in this Operation and Maintenance Manual.
q
Commercially available grease additives may be good for the machine, but they may also cause harm.
Komatsu does not recommend any commercially available grease additive.
q
Refer also to section ( "RECOMMENDED FUEL, COOLANT, AND LUBRICANT (7-4)").
NOTICE
Your automatic grease system has been set up before shipping from the factory. Changing the grease
settings could adversely change the performance of the machine. If in doubt please consult your
Komatsu distributor.
The automatic grease system consists of:
q
Grease pump (1) with integrated control unit.
q
Distribution blocks with grease metering units.
q
In-cab display (2).
(1) Automatic greasing pump, Control unit (6) System error lamp
(2) Automatic greasing system monitor (7) Coupling for greasing
(3) Greasing mode selector switch (8) Grease tank
(4) Greasing mode display lamp (9) Test button
(5) Greasing pump