Komatsu PC210-10 DEMOLITION BASE SPEC., Руководство по эксплуатации и техническому обслуживанию

Страница: 384 / 458

MAINTENANCE SCHEDULE TABLE MAINTENANCE
4–74
EVERY 4000 HOURS MAINTENANCE
EVERY 4000 HOURS MAINTENANCE:ALL-33F0-015A00A
Carry out the periodic maintenance work of every 100, 250, 500, 1000 and 2000 hours of operation at the same
time.
CHECK WATER PUMP
CHECK WATER PUMP:ALL-BA10-360K00A
Check for leakage of water and oil around the water pump. If
any problem is found, ask your Komatsu distributor to carry out
disassembly, repair, or replacement.
CHECK VIBRATION DAMPER
CHECK VIBRATION DAMPER:ALL-A5E0-360K00A
For the check and replacement of the vibration damper, special
tools are required. Ask Komatsu Ltd. or your Komatsu distribu-
tor for the replacement. It has to be replaced with a new one in
the following cases.
Mating mark (1) is stamped both on the damper hub and on the
inertia member of the vibration damper to show any misalign-
ment between the two.
If this misalignment exceeds 1.6 mm, or if there is any dent (2)
found on the damper metal surface deeper than 3.2 mm, then
the vibration damper must be replaced.
CHECK STARTING MOTOR
CHECK STARTING MOTOR:ALL-AK70-360K00A
Contact your Komatsu distributor to have the starting motor checked.
If the engine is started frequently, have this inspection carried out every 1000 hours.