Komatsu PC210-10 DEMOLITION BASE SPEC., Руководство по эксплуатации и техническому обслуживанию, Страница: 299 / 458

OPERATION TROUBLES AND ACTIONS
3–229
TROUBLES AND ACTIONS
Troubles and actions:ALL-0000-001K14A
RUNNING OUT OF FUEL
RUNNING OUT OF FUEL:ALL-0000-14GK00A
When starting after running out of fuel, fill with fuel and bleed the air from the fuel system before stating.
When bleeding air, see "REPLACE FUEL PRE-FILTER CARTRIDGE (4-49)"or "REPLACE FUEL MAIN FILTER
CARTRIDGE (4-62)".
PHENOMENA THAT ARE NOT FAILURES
Phenomena that are not failures:PC-0000-14HK00A
Note that the following phenomena are not failures:
q
When the arm control lever is operated to the IN position
and the work equipment is lowered under no load from a
high position, the arm speed drops momentarily when the
arm is more or less at the vertical position.
q
When the bucket control lever is operated to the CURL
position and the work equipment is lowered under no load
from a high position, the bucket speed drops momentarily
when the bucket teeth are more or less at the horizontal
position.
q
The bucket or arm wobbles by itself during heavy-duty dig-
ging operations.
q
When starting or stopping the swing, noise will be emitted from the brake valve.
q
When going down a steep slope at low speed, a noise is emitted from the travel motor brake valve.