Komatsu PC210-10 DEMOLITION BASE SPEC., Руководство по эксплуатации и техническому обслуживанию

Страница: 107 / 458

OPERATION EXPLANATION OF COMPONENTS
3–37
(H) Switch F3: To move downward (forward) by 1 space. (An
icon at the extreme end moves to the top.)
(I) Switch F4: To move upward (backward) by 1 space. (An icon
at the top moves to the extreme end.)
(J) Switch F5: To cancel any change and return to the previous
screen.
(K) Switch F6: To decide any selection and change contents
and to advance to the next screen.
REMARK
q
Even if guidance icons are of the same shape, their display positions and corresponding function switches
may differ according to screens to be displayed.
q
The guidance icons and their functions not explained above are shown in the pages where the control meth-
ods of respective screens are explained.
WORKING MODE SELECTOR SWITCH
WORKING MODE SELECTOR SWITCH:PC220-PT5W-043K00A
Use this switch (2) to set the movement or power of the work
equipment.
The operation becomes easier if the mode is selected to match
the content of the operation.
P mode: For heavy-load operations
E mode: For operation with emphasis on fuel consumption
L mode: For fine control and lifting operations
B mode: For breaker operations
ATT/P mode: For operations of 2-way attachments like crusher
(machines ready for installation of attachment)
ATT/E mode: For operations emphasizing fuel consumption out
of those of double-acting attachments, such as crusher (attach-
ment-ready machines)
q
When the monitor first appears, it is automatically set to the
mode in use when the starting switch was turned to the
OFF position in the previous time.
q
Press switch (2) to display the working mode selection
screen. For each set mode, the pilot monitor at the top right
of the monitor display shows P, E, L, B, ATT/P, ATT/E.