Komatsu PC200-8M0, Руководство по ремонту

Страница: 314 / 1254

SEN06123-00
10-600
48
PC200, 200LC, 220, 220LC-8M0
600 Electrical system
Machine monitor system
Switches 1
No. Name Function Operation
1
Auto-deceleration
switch
[Numeric keypad: 1]
Switches the auto-deceleration
function ON/OFF.
Lights up: ON
Lights off: OFF
• When working mode is “L”, this switch is always
“OFF” after engine started.
OFF
io
ON
2
(*1)
Working mode
selector switch
[Numeric keypad: 2]
Displays the working mode
selector screen.
P: Heavy-duty operation
E: Low-fuel operation
L: Fine operation
B: Breaker operation
ATT-P: Double-acting attachment operation
ATT-E: Double-acting attachment and low-fuel
operation
3
Travel speed selector
switch
[Numeric keypad: 3]
Changes the travel speed.
Lo lights up: Low speed
Mi lights up: Medium speed
Hi lights up: High speed
• Speed is sequentially changed as shown below.
• Lo (Low speed)
o
Mi (Medium speed)
o
Hi (High
speed)
o
Lo (Low speed)
4
Buzzer cancel switch
[Numeric keypad: 4]
Stops the alarm buzzer.
(Some alarm buzzer does not
stop sounding even if the switch is
pressed.)
• The alarm buzzer stops sounding.
• The alarm buzzer sounds again if another error
worth alarming is detected.
5
(*2)
Wiper switch
[Numeric keypad: 5]
Operates the front glass wiper.
INT: Intermittent operation
ON: Continuous operation
Lights off: Holds in position • Pressing the switch sequentially changes the
wiper operation.
OFF (Stop)
o
INT (Intermittent)
o
ON
(Continuous)
o
OFF (Stop)