Komatsu PC130-8, Руководство по ремонту

Страница: 402 / 1043

SEN04115-04 30 Testing and adjusting
20
PC130-8
Monitoring
The machine monitor can monitor the condition of
the machine in real time by receiving signals from
various switches, sensors, and actuators installed
to many parts of the machine and the information
from the controllers which are controlling switches,
etc.
1. Selecting menu
Select "Monitoring" on the service menu
screen.
2. Selecting monitoring items
After the "Monitoring selection menu screen" is
displayed, select items to be monitored with
t h e f u n c t i o n s w i t c h e s o r n u m e r a l i n p u t
switches.
q [F1]: Move to next page (screen)
q [F2]: Move to previous page (screen)
q [F3]: Move to lower item
q [F4]: Move to upper item
q [F5]: Reset input numeral/Return to ser-
vice menu screen
q [F6]: Confirm selection
a
Selection with function switches: Select an
item with [F3] or [F4] and confirm it with
[F6].
a
Selection with numeral input switches:
Enter a 5-digit code, and the item of that
code is selected directly. Confirm that item
with [F6].
a
If the color of the selected box changes
from yellow to red, selection of the item of
that box is confirmed.
a
Up to 6 monitoring items can be selected
at a time. You may not able to set up to 6
items, however, depending on the display
form of those items.
3. Deciding monitoring items
After selecting monitoring items, execute moni-
toring with the function switch or numeral input
switch.
a
Execution with function switch: Double-
click or hold down [F6] (about 2 seconds).
a
Execution with numeral input switch: Input
[99999] and press [F6].
a
When monitoring only 2 items, for exam-
ple, select them and confirm with [F6]. If
[F6] is pressed once more at this time,
monitoring is executed.
a
If monitoring items are selected up to the
limit number, monitoring is executed auto-
matically.