Komatsu PC1250-11, Оригинальное руководство пользователя

Страница: 41 / 452

PROTECTION AGAINST FALLING, FLYING OR INTRUDING OBJECTS
On jobsite where there is a danger of falling objects, scattering
fragments, and things which may intrude into operator's cab, in-
stall the necessary equipment to protect the operator depend-
ing on the working conditions.
• When operating on jobsite, such as mines or quarries
where there is a hazard of falling rocks, install falling object
protective structure (FOPS) and a front guard, and always
keep all the windows and doors closed when operating. In
addition, always check that there is no one except the op-
erator in the surrounding area where there is a danger of
falling objects, scattering fragments.
• When performing demolition or breaker operations, install
a front guard and always keep all the windows closed dur-
ing operation. In addition, always check that there is no
one except the operator in the surrounding area where
there is a danger of falling objects, scattering fragments.
Above precautions are developed for the standard jobsite. De-
pending on the conditions of the jobsite, installation of addition-
al guards is necessary.
Do not operate the machine without the necessary guards. Be
sure to consult with your Komatsu distributor about necessary
guards.
UNAUTHORIZED MODIFICATION
• Komatsu will not be responsible for any personal injuries, product failures, physical loss or damage, or influ-
ence on the environment resulting from modifications made without authorization from Komatsu.
• Any modification made without authorization from Komatsu can create hazards. Before making a modifica-
tion, consult your Komatsu distributor.
PRECAUTIONS RELATED TO ATTACHMENTS AND OPTIONS
• Any personal injuries, product failures, physical loss or damage, or influence on the environment resulting
from the use of unauthorized attachments or parts will not be the responsibility of Komatsu.
• When installing optional parts or attachments, contact your Komatsu distributor for advice to any potential
problems or safety and legal requirements.
• The machine weight will not exceed ROPS certified value as long as the optional attachments written in the
attachment combination table of this manual are installed. When installing optional parts or attachments
which are not written in this manual, the machine weight must not exceed ROPS certified value. Always
contact your Komatsu distributor before installing.
• Installing some work equipment combinations may cause interference and damage with the cab or other
parts of the machine during operation and could cause serious personal injury or death. Before using unfa-
miliar work equipment, always check for potential interference while operating the machine. Always ensure
the operator's safety when working with unfamiliar work equipment.
• When installing and using optional attachments, always read the instruction manual for the attachment, and
the general information related to attachments in this manual.
PRECAUTIONS RELATED TO CAB GLASS
• If the cab glass is broken during operations, stop operations and repair the cab glass immediately.
• If the cab glass on the work equipment side is broken, there is a hazard that the operator may be directly hit
or caught in the work equipment. If the glass is broken, stop operation immediately and replace the glass.
• The ceiling window is made of plastic, so if it is scratched, the visibility will become poor and there is danger
that it may break. If the ceiling window is scratched, replace it with the new one as soon as possible. If the
,&
,&
SAFETY
GENERAL PRECAUTIONS COMMON TO OPERATION AND MAINTE-
NANCE
2-17