Komatsu PC1250-11, Оригинальное руководство пользователя

Страница: 145 / 452

1.
Select “Screen Adjustment (Camera)” (2) on “Monitor Set-
ting” menu screen, then press the switch F6.
2.
Use the switches F2 to F6 to adjust the brightness of the
screen.
F2: Resets an adjusted value to default value.
F3: Moves the indicator to the left by one level.
F4: Moves the indicator to the right by one level.
F5: Cancels the change and returns the screen to “Monitor
Setting” screen.
F6: Accepts the change and returns the screen to “Monitor
Setting” menu screen.
REMARK
As long as “*” mark is displayed in the upper right corner of
the screen, brightness is automatically restricted by the
machine monitor to protect the liquid crystal. Screen ad-
justment may not change the screen brightness as long as
“*” mark is displayed. However, it is not an error.
CLOCK ADJUSTMENT
With “Clock Adjustment” menu, you can change the setting of the clock displayed on the standard screen of the
monitor.
1.
Select “Clock Adjustment” (3) on “Monitor Setting” menu
screen, then press the switch F6. The screen switches to
the selection menu for the clock adjustment.
The following 5 items can be changed.
(a): “GPS Synchronization”
(b): “Calendar”
(c): “Time”
(d): “12h/24h Mode”
(e): “Daylight Saving Time”
REMARK
• After a long-term storage, the 2 items of (b) “Calendar”
and (c) “Time” are reset. Accordingly, you must read-
just them.
• When “GPS Synchronization” is set to ON, they can
be automatically readjusted.
2.
Perform the following setup procedure by operating the
switches F3 to F6 on the “Clock Adjustment” screen for se-
lecting a menu.
OPERATION EXPLANATION OF COMPONENTS
3-79