Komatsu HD325-8, Руководство по эксплуатации и техническому обслуживанию

Страница: 143 / 464

MONITOR SETTINGS
Each item of “Monitor Setting” menu screen is to make the set-
tings for the machine monitor.
• “Rearview Monitor Setting”
• “Meter Display Selection”
• “Screen Adjustment”
• “Clock Adjustment”
• “Language Setting”
• “Operator ID”
REAR VIEW MONITOR SETTING
This is used to set the rearview monitor.
1.
Select “Rearview Monitor Setting” on “Monitor Setting”
menu screen, then press ENTER switch (4).
2.
“Rearview Monitor Setting” menu screen is displayed.
You can perform the following operations with the switches
(1) to (4) on the switch panel.
(1) UP switch
Moves to the previous item (1 line above).
When it is on the first line, it moves to the last line.
(2) DOWN switch
Moves to the next item (1 line below).
When it is on the last line, it moves to the first line.
(3) RETURN switch
Cancels the selected item, and returns the screen to “Monitor Setting” menu screen.
(4) ENTER switch
The screen changes to the setting screen for the selected item.
GUIDE LINE DISPLAY MODE
This is used to change the display or non-display of the guide line on the rearview monitor.
OPERATION EXPLANATION OF COMPONENTS
3-83