Komatsu HB215LC-3 Скачать руководство пользователя

Страница: 287 / 492

METHOD FOR OPENING AND CLOSING DEF PUMP COVER
METHOD FOR OPENING DEF PUMP COVER

Unlock cover (1) at the right front of the machine with the
starting switch key.

Open cover (1) with your hand, and latch lock stay (2).

METHOD FOR LOCKING DEF PUMP COVER

Unlatch lock stay (2) and close cover (1).

Lock cover (1) with the starting switch key.
Do not forget to pull the starting switch key out.

METHOD FOR OPENING AND CLOSING CAB DOOR
When opening the door (locked door)

Insert the key into the key slot.

Turn the key clockwise to unlock the key, then open the door handle.
Position (A): OPEN

OPERATION

MACHINE OPERATIONS AND CONTROLS

3-215

Содержание HB215LC-3












































































































































































































































































































































































































































































































Результаты поиска

Содержание HB215LC-3

Отзывы:

Похожие инструкции для HB215LC-3

Бренды по названию

Популярные бренды

Komatsu HB215LC-3, Руководство по эксплуатации и техническому обслуживанию

Результаты поиска

Содержание HB215LC-3

Отзывы:

Похожие инструкции для HB215LC-3

Бренды по названию

Популярные бренды