Komatsu HB215LC-3, Руководство по эксплуатации и техническому обслуживанию

Страница: 221 / 492

1.
Turn the starting switch to ON position. When the fuel level
caution lamp (1) lights up in red, check the fuel level with
fuel gauge (2) on the machine monitor.
When the fuel gauge pointer indicates the red range, the
fuel quantity is 41 ℓ or less.
Since the fuel level is low, add fuel.
2.
After checking, return the starting switch to OFF position.
3.
Open the fuel filler cap (F) on the fuel tank and add fuel
through the filler port until the float gauge (G) comes up to
the highest point.
Fuel tank capacity: 400 ℓ
Position of tip (a) of float gauge (G) when fuel tank is full:
approximately 50 mm
REMARK
If the breather hole (4) in the cap is clogged, the pressure
inside the tank will go down and this may cause fuel to
stop flowing. To prevent this, clean the breather hole from
time to time.
4.
After adding fuel, push the float gauge (G) straight down
with the fuel filler cap (F). Be careful not to get the float
gauge (G) caught in the tab (3) of fuel filler cap, and tight-
en the fuel filler cap (F) securely.
METHOD FOR CHECKING CAPACITOR
1.
Turn the starting switch key to ON position (B).
NOTICE
Do not start the engine at this time.
OPERATION MACHINE OPERATIONS AND CONTROLS
3-149